farm machinery Archives | Country Guide

Farmers who think leasing equipment will allow them a faster tax write-off may find the opposite to be true.

Lease or buy?

Accountant dispels the tax advantage myth of leasing

By Scott Garvey April 10, 2019

Reading Time: 5 minutes It’s been offered as accepted fact in more than a few coffee shop conversations that leasing equipment offers significant tax advantages to farmers. Talk to the sales staff at dealerships and you’ll likely hear them make the same claim. Even so, Lance Stockbrugger, a chartered accountant and cash crop producer from Saskatchewan, says the idea […] Read more

Lozova plans to first introduce itself to Canadian farmers with its Ducat disc harrow.

Guide Business, Machinery

Building their Canadian base

While the rest of us had our eyes turned south, Ukrainian manufacturer Losova used CUFTA to set up shop in Canada

By Scott Garvey December 18, 2018

Reading Time: 5 minutes If we’ve heard about NAFTA and USMCA once during the past 12 months, we’ve heard about them a million times, and for good reason. As the U.S. president’s rhetoric around the renegotiations heated up, the risk to established supply chains in virtually every manufacturing sector kept business executives up at night. Now, with a new […] Read more

All three provinces require that farm machinery be covered by a one-year warranty from the date of first use, and that replacement parts be available for 10 years after purchase.

Equipment, Machinery

If you’re not happy with your purchase

All three Prairie provinces have protection for farm equipment purchasers, but the provisions differ

By Richard Kamchen November 21, 2018

Reading Time: 5 minutes If you’ve taken parts or equipment home but they’re not working as promised, Manitoba, Saskatchewan and Alberta all have farm implement acts providing for the dealer to repair or replace them. But while the three provinces have some similar protections, they also differ significantly. All deal with the sale, lease and lease-purchase of farm equipment […] Read more

These retro-styled 150 Series machines are being offered in limited numbers to commemorate 40 years of the Axial-Flow IH combines.

Machinery, Machinery Guide

New combines from Case IH

For 2019, the 250 series debuts with impressive new technology

By Scott Garvey October 11, 2018

Reading Time: 4 minutes If your goal is to introduce new combines to North America, why not do it right where those machines are built. That was the logic behind Case IH’s July media event at its combine assembly plant in Grand Island, Nebraska. Members of the North American farm media were invited there to get a first look […] Read more

Using an RG 1300 C allows a grower to apply urea while seeding a cover crop into standing corn.

Crops, Machinery

New from old

Adapting old machines to precision ag is possible after all

By Ralph Pearce September 11, 2018

Reading Time: 5 minutes When it comes to reusing, recycling or refashioning, farmers have always been the best. But mention “precision ag” and the feeling is that everything has to be expensive and brand shining new. Seldom does it seem possible to take something that’s already on the farm and rework it into something to use today. What if […] Read more

Machinery, News

VIDEO: Get in (the sprayer seat) and drive

Ag in Motion 2018: Sprayer Ride & Drive

By Glacier FarmMedia Staff August 16, 2018

Reading Time: < 1 minute The ‘Ride & Drive’ is a popular field demonstration at Ag in Motion, and 2018 was no different. This year, farmers, spray applicators and machinery dealers alike had the chance to make side-by-side comparisons of new sprayer models from New Holland, Apache, RoGator and Case IH. Spencer Myers of AgDealer.com gives you a quick rundown […] Read more

Machinery, Reuters

CNH Industrial improves guidance after strong Q2, shares up 10 pct

By Agnieszka Flak July 30, 2018

Reading Time: 2 minutes Milan | Reuters (July 26, 2018) – Truck and tractor maker CNH Industrial raised its full-year guidance on Tuesday after better-than-expected quarterly earnings, sparking a more than 10 percent rally in its shares. Milan-listed shares closed 10.6 percent higher at 9.93 euros, making it the best performer on the city’s blue-chip index, which ended the session […] Read more

If you dream of getting new iron for this year’s harvest, you need to plan ahead — dealers no longer have a big surplus of equipment on their lots.

Machinery, News

Iron backlog gone as equipment makers rightsize

It’s taken a few years, but dealers have finally whittled down inventories

By Jennifer Blair July 6, 2018

Reading Time: 3 minutes Two years ago, you couldn’t drive past an equipment dealership without noticing the rows upon rows of machines — carry-over of anticipated demand that never came. “In 2013 and 2014, everybody was firing on all cylinders,” said Leah Olson, president of the Agricultural Manufacturers of Canada. “With our record harvests, there was a fundamental shift […] Read more

Sergio Marchionne, chairman of CNH Global, the parent company of New Holland and Case IH, and CEO of FCA, warned against killing NAFTA during a recent press conference in Detroit.

Guide Business, Machinery

NAFTA indecision

Washington may be divided on NAFTA, but machinery manufacturers certainly know where they stand

By Scott Garvey March 15, 2018

Reading Time: 5 minutes Through mid-winter, the push from machinery executives for the U.S. government to reach a deal on NAFTA seemed to be gearing up. AEM (the Association of Equipment Manufacturers) was sending out that message even louder and clearer than it had been on behalf of its member companies in the ag and construction machinery sector. An […] Read more

Machinery, Machinery Guide

Re-energizing electric drive

Today’s concept tractors may never get beyond the prototype stage, but that isn’t going to stop electrification

By Scott Garvey February 14, 2018

Reading Time: 6 minutes It was one of those great opportunities that I savour. I was with two very senior executives from one of the full-line manufacturers, and we were having a casual and candid conversation over lunch. We were in a private dining room on the grounds of the Agritechnica machinery show in Germany. Eventually the conversation drifted […] Read more

First of four vessels arrives in Churchill

Prairie cash wheat: Bids mixed, reacting to futures and loonie

Little variation seen in global grain supply and demand data

GFM Network News